JEM STRAPPING SYSTEMS

JEM Strapping Systems is capable of providing you with all of your strapping & packaging needs. Whether you are in need of Strapping, Stretch Film, Angleboards, Tools, or Repair, JEM Strapping Systems can meet those needs. Check out our Products page for more information on the products and services we offer.

(877) 536-6584

CAST MACHINE STRETCH FILM

Seven-layer JEM High-Performance Machine Film makes all other conventional films obsolete. It guarantees customer savings through superior performance. Utilizing leading edge metallocene resins, JEM HP Film outperforms our competitor's obsolete films by maximizing these film characteristics:

Loading unitizing strength

Toughness

Puncture resistance

Clarity

300% pre-stretch capabilities

One side cling JEM HP Film redefines the industry standard gauge. It insures a minimum of 20% lower replacement gauge over current 3 layer films on the market.

JEM High-Performance Machine Wrap will help you to reduce waste packaging at source and also allow you to reduce your wrapping cost.

Contact Us for a stretch-film demonstration and evaluation. Let us reduce your packaging costs!

CAST MACHINE STRETCH FILM
	PART NUMBER	SIZE			ROLLS PER CARTON	CARTONS PER SKID
	PART NUMBER	WIDTH	THICKNESS	LENGTH	ROLLS PER CARTON	CARTONS PER SKID
Standard Pre-stretched up to 250%	QF3 2050080	500 mm	20.3 mic	5000'	1	40
	QF3 2060080	500 mm	20.3 mic	6000'	1	40
	QF32090	500 mm	20.3 mic	5000'	1	40
	JMSC204015	500 mm	29 mic	4000'	1	40
	QF320115	400 mm	29 mic	3500'	1	40
	PART NUMBER	SIZE			ROLLS PER CARTON	CARTONS PER SKID
	PART NUMBER	WIDTH	THICKNESS	LENGTH	ROLLS PER CARTON	CARTONS PER SKID
High Performance Pre-stretched up to 280%	MWVFNASU500155 HP7 layer	500 mm	15 mic	5000'	1	40
	MWVFNASU500165	500 mm	16 mic	5000'	1	40
	MWVFNASU500175	500 mm	17 mic	5000'	1	40
	PART NUMBER	SIZE			ROLLS PER CARTON	CARTONS PER SKID
	PART NUMBER	WIDTH	THICKNESS	LENGTH	ROLLS PER CARTON	CARTONS PER SKID
Ultra High Performance Pre-stretched up to 300% +	QF72047600	500 mm	12 mic	6000'	1	50
	QF72047800	500 mm	12 mic	8000'	1	50
	QF72049800	500 mm	12.45 mic	8000'	1	50
	QF7204FF8000	500 mm	14 mic	8000'	1	40
	QF72063500	500 mm	16 mic	5000'	1	50

Colored Stretch Film as well as other thicknesses are also available upon request. Contact a Sales Representative for more information.

BLOWN STRETCH FILM

Blown Stretch Film uses a melted plastic resin extracted into a closed circular bubble with air blown throgh to cool the resin. The inflated bubble is pulled upward by air and continuously adding more resin. Airflow is also used on the outside of the bubble to cool the film as it is being pulled upward. A continuous seamless tube of thin film is created. After the film has cooled it is slit, flattened, and wound into rolls.

Because blown stretch film uses a slower air cooled method, the film can crystallize and have a slight haze. Blown Stretch Film is often stronger than cast and can offer the ability to use a lower gauge compared to cast. We recommend blown film for companies wrapping very heavy pallet loads with sharp edges and corners.

Please Contact us if you are in need of Blown Stretch Film

CAST STRETCH FILM

Initial machinery start-up costs are often more for Cast Stretch fILM in comparison to Blown; however, production is much cheaper than Blown Stretch Film. Cast Stretch Film offers the ability to make very thin uniform film. Hybrid stretch films and equivalent stretch films are made with the cast stretch film process.

Cast Stretch Film uses rollers to cool plastic resin. Once the resin is extracted from the extruder, it is immediately cooled and solidified on cooling rolls. When the film reaches the end of the cooling rolls it is trimmed and can be rolled directly onto a material roll for resale.